GE Power Sp. z o.o. Steel Foundry Closure - Poland
Starts: 01 July 2025 at 08:00 BST
Ends: 11 November 2025 at 14:00 GMT
Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 430 of 430 lots
- LOT 408
![site]()
(12 Pieces) Assorted Precision Instruments
Including: (6) External Vernier Scale Marking Gauges (1600mm - 3200mm); (2) Straight Edges, 4 Metres & 1 Metre; (2) Carbide Tipped Scribers; (3) Engineer Squares, (1) x 2 Metre & (2) x 600mm. - LOT 33G
![site]()
Wood Working Shop Extraction Room
Consisting Of Cyclone, Feeder, Ventilator With Motor, Vitroservice Clima Heater, Klimor Cooler, Briklis Centrifuge Electric Unit, Sprinkler System, Water Tank, 300 Litre Air Vessel, Piping & Ducting. Note: This Is Located On The First Floor. - LOT 13
![site]()
- LOT 24
![site]()
Work Platform With Dual Ladders
Adjustable Height Legs. Approx Dimensions L2,560 x W1,600 x H1,680mm. - LOT 41
![site]()
- LOT 47
![site]()
- LOT 48
![site]()
- LOT 58
![site]()
- LOT 68
![site]()
- LOT 76
![site]()
- LOT 126
![site]()
- LOT 153
![site]()
- LOT 290
![site]()
- LOT 308
![site]()
1 Lot Assorted Tooling Aids
Including (2) Heavy Duty Angle Plates - Dimensions Approx 2700mm high x 1100mm x 700mm Wide; (1) Angle Plate 1200mm x 1100mm x 1800mm High; (4) Cast Iron Heavy Duty Riser Blocks, 500mm x 480mm x 900mm; (2) Slotted Blocks 500mm x 800mm x 600mm; (4) Heavy Duty Bins; (6) Cast Iron Riser Blocks, 300mm x 300mm x 400mm. - LOT 310
![site]()
(4) Assorted Vernier Scale Marking Gauge Measuring Instruments
Comprising: (1) x 5 Metre; (2) x 2 Metre & (1) x 3 Metre. - LOT 314
![site]()
- LOT 317
![site]()
- LOT 358
![site]()
- LOT 361
![site]()
- LOT 374
![site]()
(4) Mobile Shop Floor Single Cooling Fans/Quenching Fans
Fan Diameter Approx 800mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 2.4 Metres High. - LOT 375
![site]()
(2) Mobile Shop Floor Double Cooling Fans/Quenching Fans
Fan Diameter Approx 1200mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 3.5 Metres High. - LOT 385
![site]()
- LOT 407
![site]()
- LOT 526
![site]()
(5) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 648
![site]()
- LOT 33B
![site]()
- LOT 33D
![site]()
2 Master Climate B15 EPB 15kW Electric Fan Heater
Air Flow Rate 1,700m³/h. Voltage 400V. (2022). - LOT 391
![site]()
1 Lot Assorted Precision Instruments
Including Bevel Protractors; (4) Assorted Vernier Scale Marking Gauge Measuring Instruments; Outside Calipers. - LOT 396
![site]()
- LOT 552
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 554
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 556
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 628
![site]()
- LOT 649
![site]()
- LOT 652
![site]()
- LOT 654
![site]()
- LOT 665
![site]()
Jet Black Safety Equipment Air Blower For PPE
Including: Indexable Sandvik Milling Cutter Bodies (Some with cabide inserts); Parting off Blocks; Indexable Slitting Saws; C6 & C8 Sandvik Capto Indexable Turning & Grooving Heads (Unused & Used); Emuge Roughing Taps; Unused Cobalt Reamers, Countersinks & Drills. - LOT 296A
![site]()
(5) Atorn Assorted Height Gauges
Comprising: (2) 1 Metre Range; (1) 600mm Range; (1) 1500mm Range & (1) 2 Metre Range. - LOT 2A
![site]()
Sand Mixer Conveyor Delivery System
Including 1,470m of Dual Conveyors, (3) Electro Magnetic Separators, Feed Lines To Wohl Mixer 1,2 & 3, Recycle Chrome Tanks, Regeneration Line, (3) Vibration Crushers, Control Room, Regeneration Crusher With Conveyor, Prodlew 2,000 Ton Chrome/Sand Feeder Container Tank, Roller Crusher, Mixer Tanks, IFE KB1000 FSD Sand Separators, Gut Chrome/Quartz Separation Line, 100 Ton Tank & Compressor Cooling Unit. (Viewing Recommended). - LOT 30B
![site]()
- LOT 32D
![site]()
Sartorius CPA224S-OCE Digital Balance
Weight Pan Dimension 80mm. Minimum Weight 10mg. Maximum Weight 220g. Voltage 115V. - LOT 32H
![site]()
- LOT 487A
![site]()
(5) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 1
![site]()
Ladle Furnace For Steel Refining with Control Station
Capacity 30-60 Ton. With Hydraulic Room (Motors, Hydraulic Cylinders, Pumps), Electrical Control Room, Wire Feeder, Manual Hydraulic Control Station, Heraeus Multilab Inspection Units, Heraeus Temperature Inspection Probes, Spare's Room, Visual Inspection Camera, Loading Bogey & SMS Demag Stanchioning. (2002) - LOT 2
![site]()
ABC Electric Arc Furnace No.2 with Control Room
Capacity 30 Ton. With Hydraulic Room (Motors, Pumps, Tanks), Manual Hydraulic Control Station, Electrical Control Room, Heraeus Multilab Inspection Units, Heraeus Temperature Inspection Probes, Cooling System & Stantioning. - LOT 8
![site]()
- LOT 25
![site]()
Temex +U0051 (HY4) Mobile Hydraulic Pack For Slide Closures
Feed System 3+PE 50Hz 400V/TN-S. With Pendant Control. (2001). - LOT 26
![site]()
Heavy Duty Steel Beam Storage Rack With Assorted Lifting Chains
Approx Dimensions L3,800 x W2,800 x H3,100mm. - LOT 39
![site]()
- LOT 43
![site]()
- LOT 80
![site]()
- LOT 87
![site]()
- LOT 132
![site]()
- LOT 295
![site]()
(1) Heavy Duty Cast Iron Bed Plate/Floor Plate
Dimensions Approx 6800mm x 7000mm; (15) T-Slots, Approx 400mm Distance. - LOT 306
![site]()
(1) 4-Drawer Wooden Top Single Door Mobile Cabinet With Tooling
Dimensions Approx 1100mm x 700mm x 900mm High; Tooling Includes (1) 500mm Height Gauge; (1) 1500mm Height Gauge; Assorted Tooling Aids. - LOT 313
![site]()
(7) Assorted Mahr Type Linear Scale Straight Edges
Comprising: (2) x 2 Metre; (1) x 1 Metre; (2) x 1.5 Metre; (1) x 3.5 Metre & (1) x 4 Metre. - LOT 328
![site]()
- LOT 364
![site]()
- LOT 411
![site]()
(4 Pieces) Assorted Precision Instruments
Comprising: (3) Straight Edges with Graduation, 1500mm & (2) x 2 Metre; (1) 1 Metre External Vernier Scale Marking Gauge. - LOT 445
![site]()
(5) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 546
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 550
![site]()
Fronius Transpuls Synergic 4000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 619
![site]()
Zimmerman VBZ250 Vertical Linisher With DRO
Swivel Table Dimension 750 x 410mm. Belt Dimension 250 x 900mm. 6.5kW Motor. Voltage 230V. S/No. 345 (2005). - LOT 623
![site]()
Mobile 'A' Frame Collapsable Gantry Crane
Dual Blocfor Wire Hoists. Approx Span 6,000mm. Approx Height Under Hoist 6,000mm. (2004). - LOT 651
![site]()
- LOT 29A
![site]()
- LOT 29C
![site]()
Twin Door Work Arc Gouging Cabin
Overall Dimensions L6,000 x W5,500 x H5,000mm. With Electronics Power Rectifier. - LOT 30C
![site]()
- LOT 33A
![site]()
HK Laboratory HK 150 Pendulum Grinder
Grinding Stone 150 x 80 x 32mm. Grinding Height Min. 4mm, Max. 90mm. Wheel Speed 2,880rpm (1.1kW Motor). S/No. 015300 (2013). - LOT 33H
![site]()
Zoller V720 Magnum Tool Presetter
Measuring Range 'X'=150-300mm, 'Z'=450mm. Enlargement x 20. Voltage 230V. With Quantity Of Tool Pots. Note: Needs Attention. (1997). - LOT 349A
![site]()
- LOT 3F
![site]()
- LOT 4C
![site]()
Heating Gas Enclosure with Front & Pendant Control Roof Doors
Approx Dimensions L11 x W14 x H13m. With Pneumatic Points & Lifting. - LOT 6M
![site]()
Electric Furnace Type Pek-1A
Internal Dimensions W490 x D970 x H320mm. With Digital Temperature Control & Timer. - LOT 6
![site]()
- LOT 9
![site]()
- LOT 22
![site]()
Temex +U0050 (HY1 II) Hydraulic Pack For Slide Closures
Feed System 3+PE 50Hz 400V/TN-S. With Pendant Control. Weight 52kg. (2001). - LOT 32
![site]()
- LOT 60
![site]()
- LOT 71
![site]()
- LOT 75
![site]()
- LOT 82
![site]()
- LOT 108
![site]()
- LOT 117
![site]()
- LOT 125
![site]()
- LOT 143
![site]()
- LOT 148
![site]()
- LOT 154
![site]()
- LOT 299
![site]()
(6) Assorted Garant Style Cupboards & Cabinets with Tooling & Tool Pods
Tooling Includes Tooling Aids, Hammers, Spanners, Sockets, Torq Wrench, Stahlwille Torque Meter. - LOT 302
![site]()
(1) 7-Drawer Cabinet with Tools
Including Torx Keys & Spanners; Dimensions of Cabinet Approx 720mm x 750mm x 1,000mm High. - LOT 303
![site]()
Assorted Racks with Tool Pods & Large Quantity of Tooling
(2) Racks (Dimensions Approx 950mm x 550mm x 2,000mm High; (1) Rack with Tool Arbor Pods, 1,000mm x 550mm x 2,000mm High; Large Quantity of Jacks , Columns & Tooling Aids. - LOT 334
![site]()
(1) Enerpac Hydraulic Hand Pump with RCS502 Low Profile Hydraulic Cylinder
10,000 PSI; 50 Tonne Capacity. - LOT 345
![site]()
- LOT 371
![site]()
- LOT 32B
![site]()
Sartorius CPA124S-OCE Digital Balance
Weight Pan Dimension 80mm. Minimum Weight 10mg. Maximum Weight 120g. Voltage 115V. - LOT 350
![site]()
- LOT 354
![site]()
- LOT 152
![site]()
- LOT 368
![site]()
- LOT 399
![site]()
- LOT 405
![site]()
- LOT 409
![site]()
(7 Pieces) Assorted Precision Instruments
Including: (4) Engineer Squares, (2) x 600mm, (1) x 1 Metre & (1) x 1.5 Metre; (3) Atorn Height Gauges, (2) x 600mm, (1) x 1 Metre. - LOT 503
![site]()
(6) Assorted Straight & Angle Pneumatic Grinders
Including Atlas Copco GTG 21 Grinder & Archimedes SF-250 Pneumatic Grinders. - LOT 525
![site]()
(5) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 528
![site]()
- LOT 531
![site]()
(3) Assorted Power Tools
Comprising: (1) Festool OF 1010 ESQ Jigsaw, 220 Volt; (2) Assorted Pneumatic Chipping Hammers. - LOT 558
![site]()
Fronius MagicWave 3000 Mobile Welder
Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG Welding. - LOT 559
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 624
![site]()
- LOT 4B
![site]()
Kemper Welding Dust Extraction Unit Series Weldfil
Extraction Capacity Min 18,500m2, Max 26,640m2. 22kW Motor. With Quantity Of Spare Filters. S/No. 210900223 (2021). - LOT 565
![site]()
- LOT 584
![site]()
- LOT 3B
![site]()
Wohr DWM 8-25 to Radial Arm Sand Mixer with Siemens Control & Hopper
Distribution 8-25 Ton Per Hour. Hydraulic Arm Length 3 + 2m. Machine No. 371209 (2007). - LOT 3
![site]()
ABC Electric Arc Furnace No.1 with Control Room
Capacity 30 Ton. With Hydraulic Room (Motors, Pumps, Tanks), Manual Hydraulic Control Station, Electrical Control Room, Heraeus Multilab Inspection Units, Cooling System & Stantioning. - LOT 14
![site]()
- LOT 17
![site]()
- LOT 23
![site]()
Work Platform With Dual Ladders
Adjustable Height Legs. Approx Dimensions L2,560 x W1,600 x H1,680mm. - LOT 30
![site]()
- LOT 34
![site]()
Tamtron SLS 100 Ton Capacity Digital Scales With Storage Rack
Rack Dimension L1,930 x W2,400 x H2,500mm. - LOT 36
![site]()
Remweg 10 Ton Capacity Digital Scales With Trolley
Rack Dimension L1,930 x W2,400 x H2,500mm. - LOT 37
![site]()
- LOT 42
![site]()
- LOT 50
![site]()
- LOT 67
![site]()
- LOT 88
![site]()
- LOT 101
![site]()
- LOT 136
![site]()
- LOT 140
![site]()
- LOT 144
![site]()
- LOT 356
![site]()
- LOT 365
![site]()
- LOT 370
![site]()
- LOT 377
![site]()
(2) Mobile Shop Floor Double Cooling Fans/Quenching Fans
Fan Diameter Approx 1200mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 3.5 Metres High. - LOT 379
![site]()
(2) Mobile Shop Floor Double Cooling Fans/Quenching Fans
Fan Diameter Approx 1200mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 3.5 Metres High. - LOT 382
![site]()
(1) Archimedes Mlotek MS13B Arbor Holder on Granite Plate
Dimensions of Plate Approx 350mm x 250mm. - LOT 462
![site]()
1 Lot Assorted Precision Instruments
Including: Assorted Angle Gauges; Stabella 30 Metre Tape; Carbide Tipped Marking Out Scribers. - LOT 476
![site]()
- LOT 482
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 527
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 537
![site]()
(2) Louvred Panels with Assorted Plastic Bins & Welding Consumables
Including Welding Accessories (Unused). - LOT 541
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 23A
![site]()
Heltos VS32B-CE2 Pillar Drill with Vice
Rise & Fall Table Dimension 420 x 320mm. Base Dimension 440 x 540mm. Throat 310mm. Vice Jaw Width 200mm. S/No. 9989 (2001). - LOT 29B
![site]()
2 Door Work Arc Gouging Cabin With Side Wall Opening
Overall Dimensions L6,000 mm x W14,800 x H4,400mm. With 2 Electronics Power Rectifiers. - LOT 3D
![site]()
- LOT 6B
![site]()
Pieco Serwis Gas Furnace 'H' With Control & Loading Bogey
With Movable Bottom (H) Automatic Control With Computer Visualisation. Load Capacity 100 Ton, Hearth Length 9.5m, Gate Clearance Width 7.5m, Height 5m, Maximum Temperature 1,150° C. Temperature Dispersion ±10° C. Asset No.601614 (2018). CPL-9. With Extraction. - LOT 6C
![site]()
Technical Automated Heavy Duty Shot Blast Cabinet With Control
Technical Automated Shot Blast Blasting Machine For Casting Cleaning. Manufactured By: Technical Nowa Sól Poland. Working Area Automatic: 3,500 x 2,000 x 3,000mm, Manual. 4,300 x 3,800 x 3,000mm. Maximum Capacity: 25 Tons. Type Of Work: Automatic, Manual. Movable & Rotating Table Ø3,500mm . Working Medium: Steel Shot. Maximum Working Pressure: 10 bar. - LOT 6D
![site]()
Pieco Serwis Gas Furnaces 'D' & 'F' With Control & Loading Bogeys
With Movable Bottom (B) Automatic Control With Computer Visualisation. Load Capacity 25 & 32 Ton, Hearth Length 4.7 & 5.3m, Gate Clearance Width 3.7 & 4.7m, Height 3.2 & 3.2m, Temperature 1,100° C & 1,150° C Temperature Dispersion ±10° C. With Extraction. - LOT 6E
![site]()
Pieco Serwis Gas Furnace 'C' With Control & Loading Bogey
With Movable Bottom (B) Automatic Control With Computer Visualisation. Load Capacity 20 Ton, Hearth Length 4.7m, Gate Clearance Width 3.2m, Height 2.3m, Temperature 1,100° C. Temperature Dispersion ±10° C. With Extraction. - LOT 11
![site]()
- LOT 15
![site]()
- LOT 28
![site]()
- LOT 44
![site]()
- LOT 45
![site]()
- LOT 59
![site]()
- LOT 64
![site]()
- LOT 65
![site]()
Top Mex-230 Horizontal Bandsaw
Cutting Capacity Round Ø230, Rectangular 230 x 340mm. Variable Speed Overide. ,Blade Dimension 3035 x 27 x 0.9mm. 1.1kW Motor. S/No. 916/0698522/07. - LOT 73
![site]()
- LOT 81
![site]()
- LOT 83
![site]()
- LOT 102
![site]()
- LOT 124
![site]()
- LOT 127
![site]()
- LOT 129
![site]()
- LOT 146
![site]()
- LOT 149
![site]()
12 Casting Furnace Boxes With Lifting Points
Approx Dimensions L2.5 x W1.6m & L2.5 x 2.5m. - LOT 155
![site]()
- LOT 315
![site]()
1 Lot Assorted Heavy Duty Tool Support Aids
Including: (2) Cast Iron Heavy Duty Riser Clamp Blocks, 2400mm x 370mm 460mm; (2) Cast Iron Slotted Heavy Duty Parallels, 5100mm x 400mm 380mm; (2) Heavy Duty Cast Iron Support Blocks, 1900mm x 960mm x 1300mm Long. - LOT 380
![site]()
- LOT 383
![site]()
(1) Planolith Granite Surface Plate on Stand
Dimensions of Plate Approx 1,000mm x 630mm x 100mm Thick. - LOT 31A
![site]()
Sartorius CP124S-OCE Digital Balance
Weight Pan Dimension 80mm. Minimum Weight 10mg. Maximum Weight 120g. Voltage 115V. - LOT 3A
![site]()
Mobile Wohr DWM15-40 to Sand Mixer with Siemens Control
Distribution 15-40 Ton Per Hour. Hydraulic Arm Length 6 + 2.8m. Arm Length Radio Controlled. Machine No. 370897 (2007). - LOT 346
![site]()
1 Lot Assorted Test Equipment
Including: (3) Core Hardness Testers; 1 Lot Dial Gauges; (1) Thermo Sensor; (4) IC MOD 26 Testers; (1) EMT 08 NICr-NiAL Temperature Gauge; (1) LSU Hardness Test Gun. - LOT 381
![site]()
- LOT 401
![site]()
(5) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 406
![site]()
- LOT 436
![site]()
(1) Enerpac Hydraulic Hand Pump with Larzep 1614408 Low Profile Hydraulic Cylinder
700 Bar, 49.6 Tonne Capacity, 60mm Dia. - LOT 469
![site]()
1 Lot Assorted Test Equipment
Including: (2) Optex Thermo-Hunter Thermometers; (1) Elcometer; (1) Testo 623 Thermohygrometer; (1) LB 522 Hytherograph. - LOT 473
![site]()
- LOT 492
![site]()
- LOT 545
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 29F
![site]()
- LOT 30F
![site]()
- LOT 535
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 557
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 563
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 4A
![site]()
Heating Gas Enclosure with Front & Pendant Control Roof Doors
Approx Dimensions L13 x W8 x H13m. With Pneumatic Points & Lifting. - LOT 544
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 621
![site]()
Zimmerman VBZ250 Vertical Linisher With DRO
Swivel Table Dimension 750 x 410mm. Belt Dimension 250 x 900mm. 6.5kW Motor. Voltage 230V. S/No. 333 (2005). - LOT 627
![site]()
- LOT 5A
![site]()
- LOT 12
![site]()
- LOT 16
![site]()
- LOT 20
![site]()
Temex +U0050 (HY1 II) Hydraulic Pack For Slide Closures
Feed System 3+PE 50Hz 400V/TN-S. With Pendant Control. Weight 52kg. (2001). - LOT 29
![site]()
- LOT 33
![site]()
- LOT 63
![site]()
- LOT 84
![site]()
- LOT 123
![site]()
(2) 50 Ton Adjustable Height Trestles
Approx Dimensions L3,300 x W1,100 x H1,800mm (Lowest Position). - LOT 128
![site]()
- LOT 131
![site]()
Lifting Equipment Storage Trolley With 2 Wire Rope Hoists
Approx Dimensions L1,480 x W880 x H1,770mm. - LOT 133
![site]()
- LOT 139
![site]()
- LOT 147
![site]()
- LOT 156
![site]()
- LOT 157
![site]()
- LOT 311
![site]()
(5) Assorted Linear Scale Straight Edges
Comprising: (1) x 5 Metre; (1) x 4 Metre; (2) x 2 Metre & (1) x 3.5 Metre. - LOT 347
![site]()
(2) CEM, Temperature & Humidity Meters
Comprising: (1) CEM Model DT-321S & (1) CEM Model DT-3321. - LOT 357
![site]()
- LOT 359
![site]()
- LOT 33E
![site]()
2 Master Climate B15 EPB 15kW Electric Fan Heater & Master B5 EPA 5kW Electric Fan Heater
Air Flow Rate 1,700m³/h. Voltage 400V. (2022). - LOT 486
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 491
![site]()
- LOT 30G
![site]()
- LOT 367
![site]()
(1) Wamed KBC-65G Oven, 220 Volt
With (3) Shelves; Dimensions of Oven Approx 400mm x 350mm x 400mm. - LOT 376
![site]()
(2) Mobile Shop Floor Double Cooling Fans/Quenching Fans
Fan Diameter Approx 1200mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 3.5 Metres High. - LOT 470
![site]()
(1) Helios Preisser (HP) 4 Metre Long, Cast Steel Straight Edge (Unused)
Plus (1) 4 Metre Long Steel Straight Edge & (1) 2 Metre Long External Vernier Scale Marking Gauge. - LOT 583
![site]()
- LOT 657
![site]()
- LOT 29E
![site]()
- LOT 620
![site]()
Rema DCKLH Cross Cut Saw With Roller Conveyors.
Table Dimension 1,240 x 550mm. Conveyor Length 5,000mm. With Foot Pedal & Front Arm Supports. S/No. 2255 (1993). - LOT 29D
![site]()
Large Twin Door Arc Gouging Cabin
Overall Dimensions L8,100 x W6,600 x H4,400mm. With Electronics Power Rectifier. - LOT 30A
![site]()
Thermo Scientific ARL 3460 OES Metals Analyzer
Focal Length: 1m. Primary Slit Width: 20 µm. Secondary Slit Width: 20, 25, 37.5, 50, 75, 100, 150 µm. Type Of Detector: Photomultiplier Tube 28 mm, 10-Stage Side Window Tubes, Fused Quartz, Glass Or MgF2 Windows. Grating Type: 1080, 1667 Or 2160 gr/mm, Selected By Analytical Task. Resolution: Dependent On Grating, Secondary Slit & Spectral Order. Sample Stand: Argon Flushed, Water-Cooled Table With Self-Contained, Closed Loop Cooling System. Voltage 230V. S/No. 4236 (2009). - LOT 21
![site]()
Temex +U0050 (HY1 II) Hydraulic Pack For Slide Closures
Feed System 3+PE 50Hz 400V/TN-S. With Pendant Control. Weight 52kg. (2001). - LOT 49
![site]()
- LOT 69
![site]()
- LOT 70
![site]()
- LOT 72
![site]()
- LOT 138
![site]()
- LOT 142
![site]()
- LOT 151
![site]()
- LOT 297
![site]()
(3) Assorted Jacks
Comprising: (1) SJ50 Rail Jack, 5000kg Capacity; (1) Baano 15-01 Rail Jack, 10t/7t Capacity; (1) Simple 2.1/2 x 18, 23" High, 24 Tonne Jack. - LOT 300
![site]()
- LOT 301
![site]()
(1) 5-Drawer Wood Top Desk with Junior 125 Vice & (2) Tool Changers
Including Torque Wrench; Screwdrivers; Sockets; Hammers. - LOT 316
![site]()
Tooling to Support Waldrich Coburg Milling Machine (Lot 1A)
Including: (3) Back End Tooling Supports; (Approx 20) Assorted Indexable Milling Cutter Bodies; (4) Slotted Cast Iron Cubes, Dimensions Approx 330mm x 450mm x 330mm; (3) 2-Door Cabinets, Dimensions Approx 1,000mm x 450mm x 1800mm High, with Assorted Tooling Aids; Assorted Spanners, (1) Tool Pod Cabinet, Dimensions Approx 2,000mm x 500mm x 900mm High; (1) Approx 1500mm Dia. Indexable Milling Cutter Body. - LOT 344
![site]()
(1) Mobile Component Platform Loading Rig
Power Control; Dimensions Of Rig Approx 3 Metres Wide x 3600mm Long x 5 Metres High. - LOT 395
![site]()
Assorted Tooling
Including (1) Building Tripod Stand (Unused); Dial Gauges; Hand Held Counters; - LOT 438
![site]()
(2) Pro Aluminium Spirit Levels
Comprising: (1) x 2 Metre Long Spirit Level & (1) 4 Metre Long Spirit Level. - LOT 3C
![site]()
Wohr DWM 25t/h Radial Arm Sand Mixer with Siemens Control & Hopper
Distribution 25 Ton Per Hour. Hydraulic Arm Length 3 + 2.3m. Machine No. 370635 (2007). - LOT 398
![site]()
- LOT 400
![site]()
- LOT 439
![site]()
- LOT 472
![site]()
(5) Assorted Height Gauges
Comprising: (2) Holex 0-600mm Digital Height Gauges; (3) 0-400mm Range Height Gauges. - LOT 495
![site]()
(5) Archimedes SFK15 Type Pneumatic Angle Grinders
Plus (1) Archimedes SF25 Straight Pneumatic Grinder - LOT 10
![site]()
- LOT 18
![site]()
- LOT 31
![site]()
- LOT 38
![site]()
- LOT 61
![site]()
- LOT 74
![site]()
- LOT 95
![site]()
- LOT 100
![site]()
- LOT 114
![site]()
Work Platform With Ladder & Electrical Supply With 2 Steel Tables
Approx Table Dimensions L1,220 x W700mm. - LOT 115
![site]()
2 Chemical Bunded Storage Unit With Distribution Valves
Approx Dimensions L1,300 x W2,100 x H3,000mm. - LOT 137
![site]()
- LOT 145
![site]()
- LOT 150
![site]()
- LOT 293
![site]()
- LOT 355
![site]()
- LOT 373
![site]()
(3) Mobile Shop Floor Single Cooling Fans/Quenching Fans
Fan Diameter Approx 800mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 2.4 Metres High. - LOT 378
![site]()
(2) Mobile Shop Floor Double Cooling Fans/Quenching Fans
Fan Diameter Approx 1200mm; Dimensions of Stand Approx 2 Metres x 1.5 Metres x 3.5 Metres High. - LOT 390
![site]()
Assorted Measuring Tools
Comprising: (2) Mitutoyo 216 452 Digicon Measuring Tapes; (1) Bosch DWM 40L Prefessional Level; (1) 600mm Digital Level. - LOT 392
![site]()
1 Lot (Approx 30) Assorted Welder Hammers
Plus Assorted Files & Precision Instrument Protective Covers. - LOT 402
![site]()
- LOT 437
![site]()
- LOT 489
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 33C
![site]()
2 Master Climate B15 EPB 15kW Electric Fan Heater
Air Flow Rate 1,700m³/h. Voltage 400V. (2022). - LOT 440
![site]()
- LOT 466
![site]()
- LOT 475
![site]()
- LOT 485
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 487
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 534
![site]()
(5) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 536
![site]()
(1) 2-Door Cupboard with Assorted Welding Lens (Unused)
Cupboard Dimensions Approx 700mm x 360mm x 1800mm High. - LOT 549
![site]()
Fronius Transpuls Synergic 4000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 551
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 553
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 555
![site]()
Fronius MagicWave 3000 Mobile Welder
Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG Welding. - LOT 560
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 566
![site]()
- LOT 576
![site]()
- LOT 578
![site]()
- LOT 579
![site]()
1 Lot Assorted Lifting Equipment
Including (1) Brugg 'UCHWYT' 500kg Capacity Lifting Attachment; Shackles; Chain & Slings - LOT 582
![site]()
(1) Transformer Unit
With Bosch DRU 160/1.3-2/12TS Converter & Control Panel in Containment Shed. - LOT 30D
![site]()
- LOT 30E
![site]()
Thermo Scientific ARL 3460 OES Metals Analyzer
Focal Length: 1m. Primary Slit Width: 20 µm. Secondary Slit Width: 20, 25, 37.5, 50, 75, 100, 150 µm. Type Of Detector: Photomultiplier Tube 28 mm, 10-Stage Side Window Tubes, Fused Quartz, Glass Or MgF2 Windows. Grating Type: 1080, 1667 Or 2160 gr/mm, Selected By Analytical Task. Resolution: Dependent On Grating, Secondary Slit & Spectral Order. Sample Stand: Argon Flushed, Water-Cooled Table With Self-Contained, Closed Loop Cooling System. Voltage 230V. S/No. 3460 (2001). - LOT 33F
![site]()
2 Door Steel Cabinet With Quantity Of Assorted Pattern Makers Tools
Approx Dimensions L1,010 x W500 x H2,000mm. - LOT 33I
![site]()
- LOT 488A
![site]()
(7) Professional High Frequency Straight Grinders
Straight Handle, Various RPM; Originally 200 Volt, Converted to 100 Volt. - LOT 4D
![site]()
Kemper Dust Extraction Unit Type 520102653913700360
Airflow 37,000m3. 37kW Motor. With Quantity Of Spare Filters. S/No. 180100166 (2018). - LOT 6G
![site]()
Pieco Serwis Gas Furnace 'B' With Control & Loading Bogey
With Movable Bottom (B) Automatic Control With Computer Visualisation. Load Capacity 110 Ton, Hearth Length 11m, Gate Clearance Width 7.5m, Height 4m, Temperature 1,100° C. Temperature Dispersion ±10° C. With Extraction. - LOT 533
![site]()
(6) Bosch 0 602 211 434 (Example) Professional High Frequency Straight Grinders
Straight Handle, Safety Switch & Central Drive; 18,000 RPM, Originally 200 Volt, Converted to 100 Volt Plug; 300Hz. - LOT 539
![site]()
(1) Ultron U-32C Stainless Steel Ultrasonic Bath with Mesh Basket
Dimensions of Bath Approx 500mm x 300mm x 200mm High. - LOT 540
![site]()
- LOT 543
![site]()
Fronius Transpuls Synergic 4000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 547
![site]()
Fronius MagicWave 4000 Mobile Welder
Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG Welding. - LOT 548
![site]()
Fronius Transpuls Synergic 4000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 581
![site]()
- LOT 646
![site]()
- LOT 30I
![site]()
- LOT 32F
![site]()
Herzog HTS 2000 Automatic Cup Wheel Grinding Machine With SIMATIC S 7 Control
Maximum Grinding Depth 2mm. Voltage 400V. S/No. MA11819-1-1 (2004). - LOT 3E
![site]()
- LOT 3G
![site]()
- LOT 6A
![site]()
(2025) Blastman Robotics Shot Blast Robot With Cross Rail & Control
Manufactured By: Blastman Robotics Finland. Robot Type: B 20 CX. Working Area: 7 x 6 x 3,5m. Telescopic Arm Length 2,750mm, Maximum Load 150kg. Type Of Work: Automatic, Manual. Working Medium: Steel Shot. Maximum Working Pressure 10 bar. Efficiency: Maximum 200 m2/h. Approx Cross Rail Length 10,500mm. - LOT 6J
![site]()
Inmet Heavy Duty Foundry Claw Lifting Attachment With Storage Stand
Capacity 35 Ton. Approx Span 3,000mm. Claw Length 4,650mm. - LOT 6K
![site]()
Quenching Tank
With 45T Load Capacity Using A Aqua Quench MK Polymer Cooling Medium (Sunken Approx 10m In The Ground). Overall Dimensions L10.9m x W 6.5m x H 4.8m. - LOT 542
![site]()
Fronius Transpuls Synergic 4000 Mobile Welder
Modular System that Includes (1) VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 561
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 562
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 564
![site]()
Fronius Transpuls Synergic 5000 Mobile Welder
Complete with VR4000 Wire Feeder, Torch and Cables; Digitised & Microprocessor Controlled; Suitable for MIG/MAG/TIG & Electrode Welding. - LOT 625
![site]()
- LOT 653
![site]()
- LOT 6F
![site]()
Pieco Serwis Gas Furnace 'A' With Control & Loading Bogey
With Movable Bottom (B) Automatic Control With Computer Visualisation. Load Capacity 55 Ton, Hearth Length 8m, Gate Clearance Width 5.2m, Height 4.1m, Temperature 1,100° C. Temperature Dispersion ±10° C. With Extraction. - LOT 656
![site]()
Essential Information
General Information
- Auction Dates
- Starts: 01 July 2025 at 08:00 BSTEnds: 11 November 2025 at 14:00 GMT
- Site Address
- Stoczniowa 2Warmian-Masurian82-300Poland
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 24 November 2025 at 08:00 GMT - 27 February 2026 at 15:00 GMTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationKarla Swain69 Middle Street
Brighton
BN1 1AL
United Kingdom info@apexauctions.co.uk+44 1273 224466