Form Fin Ltd

Able to quickly and efficiently wrap long items in polythene wrap, ready for shipping or for protection.

Vertical machining centre with 3 controlled axes for drilling, milling and copy milling aluminium, steel, PVC, plastic and wood profiles.

Reciprocating Polishing machine for the polishing of long, flat sections or the mirror polishing of plate and sheet stock.

Reciprocating Polishing machine for the polishing of long, flat sections or the mirror polishing of plate and sheet stock.

3 headed saw. With 2 x Emmegi saws fitted with highly acurate digital measuring system.

Heavily modified to an extremely high standard. Allowing the powered pass through of work for blasting by multiple blasting nozzles

66 in total in varying sizes and designs, please consult photographs for detail

Professionally specified plant formally used to extract from 2 x 4m anodising lines.

Storage tank, including bund with weather cover and sight glass Currently located outside

Reverse Osmosis plants are used for water De-mineralisation.

Includes Magnum CV 96ZM Auto regeneration Control Valves has manual salt dosing station and 2 cylinders approximately 800mm diameter by 2000mm high each.

ICS TAE 301 , Cooling capacity of approx 90kW, with installed power of 34.3kW

11kW Hydrovane Rotary vane compressor with air receiver

Hydrovane Rotary vane compressor, Model 707, 20154 Run Hours

150mm wide diagonally treaded contact wheel, belt driven by 2.2kW drive motor.

Heavy duty, proven design with maximum diameter 75mm. Extra Wide mop pack - 150mm wide mop

Large Mezzanine floor in very good condition. Included is all steelwork and wooden comfort flooring panels, suitable for power work.

Used for sizing panels of any type, single or multi layer, with speed and precision.

Air Cooled Silicone diode transformer/rectifier, Continuously rated

Air Cooled Silicone diode transformer/rectifier, Continuously rated

Including full 316 S/S construction. Full canopy (Including ducting, excludes fan)

Twin stainless steel tanks including APV heat exchanger and Grundfos Pump

Includes dosing gear and mixing tanks. See Detail

Tank number 14, incluides cathode rail, water cooled DC contact points, sprung intensifier driven contact points to ensure good DC connection

Tank number 15, incluides cathode rail, water cooled contact points, sprung intensifier driven contact points to ensure good connection

900mm wide. Constructed from 316 stainless steel Includes burner for tank heating and 4 spare Barta Burners

900mm wide. Constructed from 316 stainless steel

900mm wide constructed from 316 stainless steel

Full set of plant overhead steelwork as currently assembled, approx 45m twin track please see video

AMENDED DESCRIPTION: 14 Plant tanks, 4.5m long x 900 mm wide, 4 x 316 Stainless Steel, 2 x Mild Steel and 8 x polypropylene tanks

Many pumps, filters, dosing pumps and mixing/storage tanks

Includes multiple Iwaki dosing pumps, Serfico pumps and Argonaught Pumps

Includes 4 x Argonaught Pumps, 3 x Iwaki Dosing pumps and Serfilco Filter

Equipment shown in photographs, Includes Vanton Pump, 2 x Tapflo Pumps, 8 x Iwaki Dosing pumps and numerous storage and mixing tanks and IBCs

Hexaphase transformer and air cooled silicon diode rectifier with thyristor controller and isolating contactors

Air cooled, water assisted, input 620kVA 0-100% control, constant current or voltage

Approximately 40 flight bars, 4250mm long all on heavy duty 4 wheeled stands. Most flight bars have titanium anodising jigs attached - See Pictures

Approximately 40 flight bars, 4250mm long all on heavy duty 4 wheeled stands. Most flight bars have titanium anodising jigs attached - See Pictures

Highly Energy Efficient cooling system used for cooling of Anodising Process tank.

Approximately 20m l x 4m w x 2.8m clearance below

Air cooled, water assisted, input 620kVA 0-100% control, constant current or voltage

Dresser Pump Division. Model 650EP160 HYD 12Bar.

Includes interconnecting pipework and valves

Heavy duty air cooled and water assisted design, leading to very small footprint

Heavy duty air cooled and water assisted design, leading to very small footprint

Model SGHPY200 + 114. Flow rate of 12m3/h at 7.5m head 1.5kW drive motor

SGKY200114MM 12m3/h at 7.5m head

1000mm diameter inlet, approximately 5.5kW motor. Serving Caustic station

1 x model SGHPY200, flow rate of 12m3/h at 7.5m head. 1 x SGPY500, Ex Phosbrite Tank - No Motor

More than 150 jigs. Long jigs at approx 1150mm, short at approx 900mm, significant quantity, grade HE9/6060 Aluminium

Over 60 Jigs Including universal finger jigs and numerous additional unused fingers in boxes

6 rails unused, 3 rails used, 10 unused ends and 20 used brass ends plus mild steel lifting lugs

Numerous Titanium jigs and frames, sprung fingers and racks

1 x CR60, Repaired, 1 x CR30 Repaired, plus 3 smaller units

3050mm diameter, 3660mm high

3050mm, 4430mm high

Including Vanton type 1.5kW Pump and dosing gear. Overall dimensions of 1200 x 1200 x 1500mm high

Johnson Filter Press with manual press mechanism located on a steel platform, and covered by a canopy includes plates and tap flow pump.

Johnson Filter press including 35 plates and manual press mechanism

Table measuring 5m x 300mm wide. Powered lift head. Mop 400mm diameter by 300mm wide.

Reciprocating Polishing machine for the polishing of long, flat sections or the mirror polishing of plate and sheet stock.

Reciprocating Polishing machine for the polishing of long, flat sections or the mirror polishing of plate and sheet stock.

Reciprocating Polishing machine for the polishing of long, flat sections or the mirror polishing of plate and sheet stock.

Aluminium Brushing Machine, brush width 350mm x 1500mm long. Includes a large quantity of unused brushes as shown in photograph

Includes Diaphragm Delivery pump on each system

Serfilco Chambers filter and one Serfilco Pump mounted model, appear unused

For use with flat bed polishing machines, lots 62, 63 and 64

2 x model T400 PTT, approx 50mm diameter connection including control panel with Apollo BC7 controller

ICS TAE 020 Chiller. 3.6kW absorbed power

2 x APV plate heat exchangers , 1 unused model 1000D-GD and 1 used model H17

Provides a way of cooling a flow of liquid without inputing any additional energy into the process

16 Iwaki Dosing Pumps

Includes 4 x impellors, spare housings, S/S Covers etc. Same model pumps at lot 24/5 and 39

Varying sizes and flow rates

2 x unused Serfilco pumps, model 60-64EA-DM2.0, 1 x Poly Blend Pump and 1 x tapflow T100 PTT

Iwaki Dosing Pump Specification: 420ml/min flow rate, adjustable from 0-360 strokes/minute. 0-20Mpa pressure utilising 230V supply, 24W

Glass encased tank heaters with repairable/replaceable elements. Includes numerous spare element in box

Assorted Spares associated with the chemical plant including motorised valves. Shelving included

3 x Perris 350 Saws with pneumatically actuated cutting motion

Bed Length of 1500mm, and includes box of tooling

HSM 4 fold tape vertical strapping bailer, foot print of 1900 x 1190 Includes Opperating Manual

JB Thorne Model 720, 11kW S/N J35749 with silencer included Av Duty, 5000m3/h

Used for the profling of straight sections, i.e rabating, bevelling and grooving.

Woodworking rip saw with a small footprint, including comatic work feeding roller

Model 1612/3 3 hp 3000rpm motor with safety kick switches and tapered ends

Model 1612/3 3 hp 3000rpm motor with safety kick switches and tapered ends

Used for dewatering sludge by spinning out excess water from materials

With multiple work holders and comprehensive controls

Manually operated1

With safety guard and foot pedal operation

Includes Elu single phase 240 Volt Grinder

4kW 3 Phase. 80kg Capacity. Mobile with Polypropylene body

4kW 3 Phase. 80kg Capacity. Mobile with Polypropylene body

4kW 3 Phase. 80kg Capacity. Mobile with Polypropylene body

4kW 3 Phase. 80kg Capacity. Mobile with Polypropylene body

Includes spare blade

Freestanding Perris 350 saw with remotely operated cutting action for increased operator safety, Includes bench, approx 4m long

Used for welding of aluminium jigs

Press designed to produce various types of carpet gripping strip

Programmable machine, able to drill into sheets of wood or plastic

Design maximum diameter 75mm. Extra Wide mop pack - 150mm wide mop

Designed to press the aluminium fingers onto anodising Jigs.

Perris 350 saw includes 4m table to right of saw and 1.9m table to left of saw

Sturdy Metal rack for holding long material

1500kgs capacity

1500kgs Capacity

With capacity of approx 1000kg, for the lifting of work

Includes electric traverse and raise/lower

1 Machine giving fixed length tissue, 1 x machine able to give a range of sizes. Both manually operated

Capable of around 50 cycles per minute, ideal for the banding of boxes coming off a production line, 800mm maximum pass through

2 x beds at 200 x 3000mm, large quantity of spares on pallet.

specially constructed for adding slots to the end of tubular sections.

Including 11kW Belt Driven Fan, inlet duct of 400mm diameter. Overall dimensions of cyclone approx 1200 x 1200 x 4500high

Solidly constructed rack, for holding of bar

Designed for use with wood dust and shavings, ideal for fitment to panel saws and other wood working plant

Compo Spray pots for use with polishing equipment

Compo Spray pots for use with polishing equipment

Traditionally well constructed flywheel press with 10 ton press action

Ingersol Rand 300l Horizontally mounted air receiver tank

Model 23PUM, 4kW

Vertically mounted with pressure gauge and safety pressure relief valve

Includes additional storage tank, mounted on wheeled trolley

Approximately 14,000l, Currently used as bulk storage for phosbrite solution

Also includes facility to see the volume of liquid within the tank

Including dosing pump, stirrer, timer, external dimensions - 1200 x 1200 x 2200mm h. Used for mixing of De-smut solution

Top Main Inlet, 4 x small dosing pipe inlets Dimensions - 1200 x 1200 x 1700mm h. Used for storing of 77% Sulphuric Acid

Pressurised make up tank and pumps, bottom outlet. Used for storage of 69% Nitric Acid External dimensions - 1200 x 1200 x 1400

Constructed from reinforced 316 Stainless steel, includes dosing and mixing gear. Tank size 3m x 1.5m x 1.5m h

4 x tanks of equal size and one slightly larger capacity

Including sight glasses

Including sight glass and overflow outlet

Only used for water, includes pump and sight glass

Large 25,000l capacity polypropylene tank.

Ideal for use as a pit pump due to being 2.5m long. Does not include motor.

Including 3 off spare impellors and stems

1200 x 1200 x 1200, mild steel, with a number of bottom outlets and Iwaki dosing pump.

Open top, Pearl Mix IBC, 1m x 1m x 1.8m h, contained Pearl Solution (Phosphoric, Sulphuric and Nitric Acid)

Including jig cleaning line, 3 stage Caustic water and desmut for aluminium jig cleaning prior to reuse on the plant

Includes Press Tools for bending and manipulating during jig manufacture.

2 x Racks complete with various sized and shaped sections of clean, unused aluminium See pictures for full details

2 x Racks complete with various sized and shaped sections of clean aluminium See pictures for full details

2 x Racks complete with various sized and shaped sections of clean aluminium See pictures for full details

2 x Racks complete with various sized and shaped sections of clean aluminium See pictures for full details

Including square and rectangular cross section bar and a quantity of small diameter circular rod in cardboard tube. Mean length 4/5m

Unused in good, clean condition

Includes number of pre drilled cathodes for anodising tanks. 2 x sizes, 80 x 40mm and 1000 x 25mm cross section suits tanks at lot 24 and 25

Approximately 4m long 10mm diameter, rods and flats

Significant quantity

Ideal for wet processing of a number of small parts at the same time

66 Jigs total, weighing over 330kgs. Includes rack

13 small to medium sized motors, some with gear box

14 x small to medium sized pumps

14 Small to medium sized motors and one large motor

Range of sizes, approx 5-7kW

15 Motors, small to medium sized with gearboxes

13 motors with pumps

20 Small Sized Pumps

3 x 11kW AEG Main drive motors and assorted Spares

16 Motors, most with little or no use

6 x Vacuum intensifiers, in this facility used to ensure good DC electrical connection in the main anodising tanks.

5 x Medium sized motors

Tank Type, 316 Stainless Steel, 5mm plate Brightener fitted with top plate to accept heaters/pumps etc having a front aperture of 550mm wide

Tank type, 316 Stainless Steel Brightener, 5mm S/S Plate Dimensions 910mm w x 1250 mm d x 4580mm l Fitted with top plate, Drip trays and apertures cut to accept 11 heaters

2 x Hoist Frames Suitable to run on RSj Girders and designs for maunal or auto operation, 4210 mm in length between lift arms. Drive gear included.

Stainless Steel Double tank, each chamber measures, 470w x 1245d x 4870mm l. Polypro tank details TBC

Tank details, 1. S/S single, 550w x 1250d x 5180mm l, complete with end weir box. 2. S/S Single, 500w x 1250d x 4870mm. 3. S/S Single, 440mm x 1220mm x 4530mm long

Tank Details: 1. Stainless Steel Double, each chamber measures 470mm w x 1245mm d x 4870mm l. also includes m/s tank frame of equivalent dimensions.

S/S tank, chamber dimensions of 540w x 1220d x 4250mm l Complete with "U" shaped 55mm diameter immersed S/S Coil

2 x Polypropylene tanks, chamber dimensions of 550w x 1220d x 4250mm l

Tank dimensions, 500w x 1220d x 5330mm l

Cross sectional sizes in the range of 150 x 200 mm, and length ranging from approximately 3-6m

4 wheeled heavy duty rectangular framed work trolleys

Including various analytical equipment, Lange Analyser, Incubator, PH Tester and laboratory ancilliaries

Working chamber approx. 800 x 650 x 600mm deep

Hexaphase transformer and air cooled silicon diode rectifier with thyristor controller and isolating contactors

Used to Re-circulate process water, giving zero process water discharge